Resources
Are you looking to purchase FatesEnd files? You can find them here:
Our files are designed for 20mm D20s and smaller. However, you can print the towers larger (or smaller depending on dice size)!
See the Dice Scaler below for % scales:
FAQs
Can I print it even smaller? These objects can be any size that your printer can support, so you can print them smaller (if you have a small printer) or larger (for large dice) if desired. All Dice towers are designed to work with standard 20mm dice at 100% scale. (Dice set/tower scales are determined by the size of the D20 in the set.)
If you can't print the towers at 100%, then print them at 60% to work with tiny 12mm dice sets (which can be found in local game stores or on Amazon.)
Why Dice Towers? Dice towers help to prevent cheating - and allow Fate to do her job! Dice Towers also add an extra level of character to your game! Each tower will include a dice tray to help protect fancy pants tables from heavy metal dice damage. Lastly (our favorite) these Dice Towers inspire envy in friend and foe alike! Enjoy that clackity-clack until fate has rendered her verdict.
Do you actually print your files? Yep, we do, then we print them again, and sometimes... again to ensure ease of printability, and that the dice actually roll through.
Recommended Slicer Settings (For FDM printers)
*These settings are for a Prusa MK3 with a 0.6mm nozzle using Prusa Slicer. Print times may vary based on slicer, printer type, and nozzle size (0.4mm nozzle size is typical).
We're received several requests for settings on the printed towers we're showcasing. We have several Prusa MK3s and all of them have a 0.6mm nozzle. Similar settings should work just fine with a 0.4mm nozzle, but please keep a close watch on your printer to ensure everything is printing correctly. These settings are exactly what we used for the towers in the photos section of the campaign. If you have alternative settings that work for you, sweet! Do that. ;-)
Print time: Base = 23hrs Roof = 8hrs
You can download the Wizard Tower files from FatesEnd1 here for FREE: https://www.thingiverse.com/thing:4197735
All FatesEnd Renders
FAQs
Can I buy just one Dice Tower, Dice Box or GM Screen?
https://www.myminifactory.com/users/Kimbolt
and https://cults3d.com/en/users/Kimbolt
Will you be cutting up files for resin printers?
Dice Jails/Vaults should fit fine on larger resin printers such as the Saturn, and some towers (the crystal tower, for example may fit). However, I'm only splitting files for 7" square print areas, so some wider towers may not fit on a Saturn (the Mayan and Pagoda towers are a good example of wide towers). I'd recommend printing wider towers at 63% and pairing them with tiny dice (can be found on Amazon).
More details (from the main campaign page - please check there for images to help illustrate further)
All files will be designed to print on smaller FDM Printers like the Prusa Mini. Files above 7" (about 177mm) tall will be split into two models so they’re printable on smaller printers. These objects can be any size that your printer can support, so you can print them smaller (if you have a small printer) or larger (for large dice) if desired. All Dice towers are designed to work with standard 20mm dice at 100% scale. (*Dice set/tower scales are determined by the size of the D20 in the set.) If you can't print the towers at 100%, then print them at 60% to work with tiny 12mm dice sets (can be found in local game stores or on Amazon.) Dice Jails and Vaults may work, depending on size and scale.